LongXshot (X-Shot Longshot Pro) Stock Lock & Cheek Rest (LEFTY & Righty)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this since there were not a lot if any cheek rests for LEFTYs... so i made my own!!
- Ocena
- 4,875 / 5
- Polubienia
- 72
- Pobrania
- 560
- Wydruki
- 8
- Wyświetlenia
- 2253
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this since there were not a lot, if any, cheek rests for LEFTYs... so i made my own!!
My Stock Lock & Cheek Rest is a 2-Piece design. This allows for two things, (i) you can just use the Stock Lock by itself if you don't need the extra height for sighting. The stock lock by itself looks great on the LongXshot with a helpful warning built right in!!! (ii) this allowed me to be able to make the Cheek Rest part ambidextrous.
Note: Pro: in the Lefty configuration the jam door is fully accessible. Con: in the Righty configuration you can not open the jam door. If you would like to remix the righty file to make a cutout for the jam door the files are available in Onshape.
The installation of the Stock Lock is Snug & Tight and must have the stock in the fully extended position. I have only tried this in PLA, which flexes just enough to press this over the stock. Taking the stock apart and off the main blaster will help in installation. Last use a little epoxy to stick the two parts together. Your done.
Please leave comments, and let me know if there are things I could do to improve form or function. And upload pics of your prints/builds and any remixes!
