Dwight Schrute Headphone Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Dwight Schrute from The Office TV Show headphone stand so you can keep your headphones in a safe head
- Ocena
- 5 / 5
- Polubienia
- 130
- Pobrania
- 513
- Wydruki
- 0
- Wyświetlenia
- 2786
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on GDM Originals amazing caricatured model, I assembled and created this headphone stand of Dwight Schrute from The Office TV Show so you can keep your headphones in a safe head, I mean… look at him:
The stand has a firm and thick base with an angled desk plate holder on the front. I created 2 desk plates (you can see the images on the profile): Assistant to the Regional Manager and Bears, Beets, Battlestar Galactica (for true fans 😁). In the main file (Dwight Schrute Headphone Stand.3mf), the desk plates are placed on 2 plates in case you prefer to print them separately or not print them. But in Dwight Schrute Headphone Stand - Both desk plates.3mf file, both are on the same plate to save some time. In any case, the plates are facing down to have a good quality.
I created the plates using MakerLab's Make My Sign tool, so you can create your own plates too. The dimensions of the desk plate are: 180mm x 40.5mm x 1.9mm. If you prefer to add some thickness to your custom desk plate, keep in mind that the desk plate has a bottom border of 2.7mm that holds the plate in place.
Desk plate settings:
- 0.2mm layer height
- 2 walls
- 15% gyroid infill
- No brim
- No support
- 2 colors, B&W
Headphone stand settings:
- 0.2mm layer height
- 2 walls
- 5% gyroid infill (it seems low but is sturdy)
- No brim
- Tree supports (auto) at 30º threshold angle
If you are not interested in having desk plates, I also created a different model with a simple 2-step circular base (Dwight Schrute Headphone Stand - Simple reinforced base.3mf), photo below as reference. Same settings, but the base has 10% infill and I added a modifier to the base and part of the neck to have 15% gyroid infill to make it extra sturdy, you can remove it if you prefer. Also 1 more wall, 3 walls.
I know supports may scare you (images below) but I used my hands and some regular pliers (for the eyes part) to remove them, let me show you the print supports:
I hope you like it and share some photos. Likewise, I would also love to see some custom desk plates!