1 / 3
Creality K1/K1c/K1 Max Door Hinges Geared Nut Trap REMIX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M3 nuts must be inserted into the model during printing and will not be visible
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 2229
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (39)Powiązane
In this remix the M3 nuts will have to be inserted at the printing stage.
I enlarged the hexagonal hole in the original model to make it easier to insert the nuts.Once the printing is finished,if you have inserted the dai without superglue,you may feel the nuts move,but it is not a problem,they cannot escape from there :-)
-Set pause at Layer n°30 in your slicer
-Insert the nuts,if you want,with superglue
-Getting the press to resume
You need n°4 M3x16 screw (in the original model you use M3X14)
