Dust Collector Hose Adapters 4" to 60mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dust collector hose adapter for a standard 4" spiral wound hose to the 60mm DC port on many shop tools
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions of this adapter.
The first is a coaxial adapter, low profile (can be set in the 4" hose to provide 0" offset). This is handy to connect your 4" line to a 60mm / shopvac hose anywhere.
The second if an off-center adapter mainly for belt sanders from Laguna. This should also fit Shop Fox and Grizzly sanders, as well as many other machines with a 60mm exhaust port. The offset allows it to fit against the protruding bearing on the drive drum. Would also find use to reduce strain as a hose adapter, or really on any other 60mm dust exhaust.
Both are fairly fast to print with no support needed.
Tested on my Prusa MKS3+ with PETG, 15% infill, 0.6mm nozzle, and 0.35mm layers. Prints fast and strong.