Dust Collector Hose Adapters 4" to 60mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dust collector hose adapter for a standard 4" spiral wound hose to the 60mm DC port on many shop tools
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions of this adapter.
The first is a coaxial adapter, low profile (can be set in the 4" hose to provide 0" offset). This is handy to connect your 4" line to a 60mm / shopvac hose anywhere.
The second if an off-center adapter mainly for belt sanders from Laguna. This should also fit Shop Fox and Grizzly sanders, as well as many other machines with a 60mm exhaust port. The offset allows it to fit against the protruding bearing on the drive drum. Would also find use to reduce strain as a hose adapter, or really on any other 60mm dust exhaust.
Both are fairly fast to print with no support needed.
Tested on my Prusa MKS3+ with PETG, 15% infill, 0.6mm nozzle, and 0.35mm layers. Prints fast and strong.