1 / 1
Activated Carbon Spacer for Rock Shox 35 + 38mm Models — zdjęcie 1

Activated Carbon Spacer for Rock Shox 35 + 38mm Models

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model for Activated Carbon Spacers for most Rock Shox 35mm or 38mm Forks. (Lyrik, Zeb, Boxxer, Pike, Revelation, Yari)

Ocena
0 / 5
Polubienia
2
Pobrania
39
Wydruki
0
Wyświetlenia
356
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Model can be printed and filled with activated Carbon from airfilters. This helps low weight riders with extreme progressive forks (e.g. ZEB with 180+mm).

Some kind of filter should be added on the lower Honeycomb end to prevent broken activated carbon pellets to fall into the moving parts of the airchamber.

Different files are showing different lengths and therefor different volumes. The length is equal to the given length of the normal spacers - be sure to double check how many spacers your fork can take with the used airshaft.

If printed correctly, the Thread will align with the Topcap of your fork.

 

Printed on Sovol SV07 with Cura 5, 0.4mm Nozzle using SUNLU PETG
0.06mm layer Height for higher stability and nicer surface finish → fat and Oil should not stick so bad

Tagi