Bike Mudguard Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for bike rear mudguards. Mounts to a 30mm pipe using a hose clamp. Uses an M6 nut and bolt.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 699
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Made this when my first mudguard mount snapped and the second kept getting loose. Mounts to a 30mm pipe using a hose clamp (max. 15mm height). Uses a single M6 nut and bolt (M6x30, socket cap). Space for the piece mounted between is a bit over 20mm, for smooth action.
This was made for bike mudguards, but I can see it being used pretty much anywhere where you need to mount something to a pipe.
-Preferably use supports, but it'll manage if you won't! Top sides will get droopy though..
-If you do use use supports, SET SUPPORT PLACEMENT TO TOUCHING BUILDPLATE. Otherwise you'll have a bad time trying to get them out. (unless you're one of those big shots with soluble ones!)
-Please use a Nyloc nut (one of those nuts with a rubber seal) or otherwise the guard will come loose with all the vibrations.
-Put some rubber padding between the clamp or the mount will loosen with time.
-If something doesn't fill your needs, feel free to edit the .step file. If you don't know how to, shoot me a message and i'll maybe do it for you.