Bike Mudguard Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount for bike rear mudguards. Mounts to a 30mm pipe using a hose clamp. Uses an M6 nut and bolt.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 40
- Makes
- 1
- Views
- 699
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Made this when my first mudguard mount snapped and the second kept getting loose. Mounts to a 30mm pipe using a hose clamp (max. 15mm height). Uses a single M6 nut and bolt (M6x30, socket cap). Space for the piece mounted between is a bit over 20mm, for smooth action.
This was made for bike mudguards, but I can see it being used pretty much anywhere where you need to mount something to a pipe.
-Preferably use supports, but it'll manage if you won't! Top sides will get droopy though..
-If you do use use supports, SET SUPPORT PLACEMENT TO TOUCHING BUILDPLATE. Otherwise you'll have a bad time trying to get them out. (unless you're one of those big shots with soluble ones!)
-Please use a Nyloc nut (one of those nuts with a rubber seal) or otherwise the guard will come loose with all the vibrations.
-Put some rubber padding between the clamp or the mount will loosen with time.
-If something doesn't fill your needs, feel free to edit the .step file. If you don't know how to, shoot me a message and i'll maybe do it for you.