Improved Z-Endstop for KP3S Pro & Pro S1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better Z Endstop/Limit Switch for the KP3s Pro to improve ease of adjustment and range of adjustment as well as accuracy
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This model aims to improve the rigidity, ease-of-adjustment, and height range of the z-axis adjustment screw/z endstop on the KP3S Pro.
Bill Of Materials (BOM)
| Name | Notes | Quantity |
| M3 Screw | length depends on part, 39-44 uses 16mm, the rest use 20mm | 1 |
| M3 Heat Insert | stls are for M3x5x4, see editing section for changing insert size | 2 |
| Threadlocker | optional | N/A |
Printing and Parts Selection
Print settings:
- Infill: 20% Gyroid
- Perimeters: 3
Parts selection:
You need to print thumbscrew.stl and one of the mounts. The mounts have height ranges in their name, pick the one that matches the distance between the bed and frame. In the photo you can see that my bed is ~56mm from the frame, so I'll pick mount 50-58.stl.
Assembly
Press the heat-insert in making sure the insert doesn't go past the bottom of the larger hole
Apply threadlocker to the screw then tighten the screw all the way and wipe off any excess threadlocker
Press the heat-insert into the base
Remove the highlighted screws and install the base with them
Thread the thumbscrew into the base and adjust the height to trigger the z endstop when the nozzle touches the bed
Editing
- open the .f3d file in fusion
- open the parameters window by navigating to Modify>Change Parameters
- Read the notes next to the parameters and change them to match your heat inserts
- export the model by navigating to File>3D Print, select the part you want to export, ensure that you have selected the high option under Refinement, and finally press OK