1 / 1
Ratrig V-Core 3.1 - 10mm belt mod - eva 3 - fmmm - integrated back — zdjęcie 1

Ratrig V-Core 3.1 - 10mm belt mod - eva 3 - fmmm - integrated back

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you want to take advantage of cheaper/easily available 10mm belts for your ratrig then this is for you.

Ocena
0 / 5
Polubienia
13
Pobrania
51
Wydruki
0
Wyświetlenia
614
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

10mm belts are far cheaper and easily available where i live,
If you're like me then this is for you.

You can only run this mod if you've already done the FMMM mod.
If not it's highly recommended given its advantages

https://www.printables.com/model/306266-v-core-3-motor-mounts-aka-fmmm

to run 10mm belts, just add a 1mm shim to your bearing stack between the bottom F695 and the 695.

you'll have to print
- joiners - gold series (10mm belt support)
- eva 3 front + back + belt grabbers (10mm belt support)

I've not noticed any benefits nor disadvantages to this mod. It's more of a BOM cost cutting thing. If you plan for it upfront it should save you a buck provided 10mm belts are cheaper and easy to get otherwise i highly recommend you stick to 9mm belts to “stick” with the community.

Tagi