1 / 7
Foldable Piggy Bank / Klappbare Piggy Bank
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Piggy Bank is foldable and is locked by magnets. / Die Piggy Bank ist klappbar und hat Magnete
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 118
- Wydruki
- 4
- Wyświetlenia
- 938
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (18)Powiązane
In addition to the printed parts, 2 cylinder head screws M3x20 and 2 magnets Ø6x3mm are required.
Assembly:
- Mark the two magnets at the point of contact with each other.
- Put the mounting device on the edge of one half, insert a magnet with mark upwards into the mounting device and knock it in with the plastic hammer.
- Remove the mounting device and press the magnet with your thumb until it snaps into place.
- Process in the 2nd Repeat half.
- Screw both halves together on the joint.
https://www.amazon.de/gp/product/B08F745KY5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Beschreibung
Zusätzlich zu den gedruckten Teilen sind 2 Zylinderkopfschrauben M3x20 und 2 Magnete Ø6x3mm erforderlich.
Montage:
- Markieren Sie die beiden Magnete an der Kontaktstelle miteinander.
- Setzen Sie die Montagevorrichtung auf die Kante einer Hälfte, setzen Sie einen Magneten mit Markierung nach oben in die Montagevorrichtung ein und schlagen Sie ihn mit dem Plastikhammer ein.
- Entfernen Sie das Montagevorrichtung und drücken Sie mit dem Daumen auf den Magneten, bis er einrastet.
- Vorgang in der 2. Hälfte wiederholen.
- Beide Hälften am Gelenk miteinander verschrauben.