1 / 7
Foldable Piggy Bank / Klappbare Piggy Bank — image 1
1 / 7

Foldable Piggy Bank / Klappbare Piggy Bank

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This Piggy Bank is foldable and is locked by magnets. / Die Piggy Bank ist klappbar und hat Magnete

Rating
5 / 5
Likes
23
Downloads
118
Makes
4
Views
938
Reviews
3

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

In addition to the printed parts, 2 cylinder head screws M3x20 and 2 magnets Ø6x3mm are required.

Assembly:

  •  Mark the two magnets at the point of contact with each other.
  • Put the mounting device on the edge of one half, insert a magnet with  mark upwards into the mounting device and knock it in with the plastic hammer.
  • Remove the mounting device and press the magnet with your thumb until it snaps into place.
  • Process in the 2nd Repeat half.
  • Screw both halves together on the joint.

 

https://www.amazon.de/gp/product/B08F745KY5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

 

Beschreibung

Zusätzlich zu den gedruckten Teilen sind 2 Zylinderkopfschrauben M3x20 und 2 Magnete Ø6x3mm erforderlich.

Montage:

  • Markieren Sie die beiden Magnete an der Kontaktstelle miteinander.
  • Setzen Sie die Montagevorrichtung auf die Kante einer Hälfte, setzen Sie einen Magneten mit Markierung nach oben in die Montagevorrichtung ein und schlagen Sie ihn mit dem Plastikhammer ein.
  • Entfernen Sie das Montagevorrichtung und drücken Sie mit dem Daumen auf den Magneten, bis er einrastet.
  • Vorgang in der 2. Hälfte wiederholen.
  • Beide Hälften am Gelenk miteinander verschrauben.

Tags