Chamber Heater PTC Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled PTC Chamber Heater holder. Remixed for my Vz235.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 1404
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
My Config:
[temperature_sensor chamber] optional for chamber temp
sensor_type: Generic 3950
#pullup_resistor: 4700
sensor_pin: PF9
min_temp: 0
max_temp: 100
gcode_id: C: C
[heater_fan Chamber_Heater]
## Hotend Fan - FAN0 Connector
## in case of a watercooler that is 24V use a Heater Pin like PF7 Heat3 for a larger mosfet that can handle more amps.
pin: PA3
max_power: 1.0
kick_start_time: 0.5
heater: chamber_heater
heater_temp: 50.0
[heater_generic chamber_heater]
heater_pin:PB1
pullup_resistor: 4700
max_power:0.7
# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
sensor_type:ATC Semitec 104NT-4-R025H42G
sensor_pin:PF5
#control: watermark
#control = pid
#pid_Kp = 63.418
#pid_ki = 0.960
#pid_kd = 1244.716
min_temp:0
max_temp:130
[verify_heater chamber_heater]
max_error: 130
check_gain_time: 120
hysteresis: 5
heating_gain: 2