Chamber Heater PTC Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled PTC Chamber Heater holder. Remixed for my Vz235.
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 83
- Makes
- 1
- Views
- 1,404
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
My Config:
[temperature_sensor chamber] optional for chamber temp
sensor_type: Generic 3950
#pullup_resistor: 4700
sensor_pin: PF9
min_temp: 0
max_temp: 100
gcode_id: C: C
[heater_fan Chamber_Heater]
## Hotend Fan - FAN0 Connector
## in case of a watercooler that is 24V use a Heater Pin like PF7 Heat3 for a larger mosfet that can handle more amps.
pin: PA3
max_power: 1.0
kick_start_time: 0.5
heater: chamber_heater
heater_temp: 50.0
[heater_generic chamber_heater]
heater_pin:PB1
pullup_resistor: 4700
max_power:0.7
# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
sensor_type:ATC Semitec 104NT-4-R025H42G
sensor_pin:PF5
#control: watermark
#control = pid
#pid_Kp = 63.418
#pid_ki = 0.960
#pid_kd = 1244.716
min_temp:0
max_temp:130
[verify_heater chamber_heater]
max_error: 130
check_gain_time: 120
hysteresis: 5
heating_gain: 2