Honda/Scepter/Moeller Fuel Tank Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A convenient fuel protector to cover the fuel connector for Honda outboards at the tank end.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Honda Marine fuel connector is excellent, but as with any other connector, it is completely exposed at the tank end when not in use leaving it exposed to dirt and saltwater.
Whether you have a Scepter/Moeller version or an OEM Honda 3/8 connector, This little cap is a snug friction fit that pops on and off easily, but remains attached firmly enough that it won't be knocked or slip off by accident.
Designed to fit the 5829 connector (Moeller 033496-10). The fitting itself is 13.0mm so this is designed at 13.1mm ID and works perfectly on a Prusa MK3S+
If you find that the fit is too loose or extremely tight (which may be the case depending on your printer's settings and accuracy), use one of the accompanying files (13.0mm or 13.2mm) to compensate accordingly.
Don't use PLA or ABS/ASA the fuel vapours will affect the plastic, PETG is significantly better and quite resistant to the couple of drops of fuel it will encounter. If you want to make it perfect, CPE is the most suited for chemical exposure, particularly fuels.
Should work on the shorter ‘old style’ 3/8th connectors too, but not on the 5/16 connectors.