Mudguard for Xiaomi Scooter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
extra broad simple to print Mudguard for Xiaomi Scooter (mine is the Pro2 but it should fit almost all Xiaomi scooters)
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 750
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
VERSION 4.0: even broader - dry pants guaranteed.
thicker base plate to prevent cracks around the holes.
bigger holes to fit the connector cable - no cable soldering etc. needed
I made this extra broad Mudguard, since i only found Mudguards that would let plenty of water pass in rainy conditions.
I used PETG CF and multiple modifiers (alternate infill percentages) to enforce the parts that would brake first. (as seen on the second picture)
its important to use screws with washers, otherwise it will brake by the screws. Max. washer diameter on this model would be 12,5 mm.