Halfords HDC200 Dashcam Suction Cup Collar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collar that fits behind the suction cup of the Halfords HDC200 dashcam. Over time the cup will lose suction…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is a collar that fits behind the suction cup of the Halfords HDC200 dashcam. Over time the cup will lose suction power, so I designed this thin collar (1.2mm in thickness) to go behind it, so it will raise the borders creating a bit more suction, and keeping the edges more flat onto the windshield.
To insert the collar, just squeeze the suction cup inside it.
I suggest to print this at the lowest resolution you can in PETG, ABS or Nylon, so to withstand hot temperatures inside the car.
This is my first 3D design, so any suggestions is more than welcome.
Outer diameter: 49.76mm
Inner diameter: 41mm
Thickness: 1.2mm
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Doesn't Matter
Supports:
No
0.12mm
Infill:
100%
Category: Automotive