Sofle V2 Case Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of kb-elmo's "Sofle Case". I made more space for the OLED screens and removed the custom plate.
- Ocena
- 1 / 5
- Polubienia
- 12
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 2239
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Really happy with the model, thanks to kb-elmo's work.
I put a good few hours into the model on Blender but it needs some cleaning up.
Total print time is about 14hours on my prusa mini. You can cut this down a bit by using no top/bottom layers on the bottom parts for and/or sparse infill (I used 15% hexagons) for example.
Make sure to check out the original on github as they also have nice models for the knobs! The original is also best if you are planning to build a sofle v2 using a mid-mount type elite-c controller or clone.
If there are any issues with the licensing let me know.