Shimano Di2 SM-BCR2 Charger Spool and Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily store your Shimano Di2 SM-BCR2 Charger
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 92
- Wydruki
- 1
- Wyświetlenia
- 527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This spool snaps around the Shimano Di2 SM-BCR2 Charger to make it easy to keep stored when not in use
When you install it, make sure all the cables have room because the charger is not symmetrical in any orientation and it only works one way. If you install it the wrong way or need to remove the spool just use a small flathead to pull back the snaps. I left a 1mm gap on the sides for this reason.
Don't pull the cable too tight when wrapping it up - the usb connector is the easiest place for it to fail.
Print the spool parts with tree supports and “remove small overhangs” turned off. See pic below
