Liczymy pasujące modele…
Has marks for adjusting B tension on 30t and 34t cassette cogs. The top of the gauge is for 28t cassettes. Replaces the paper gauge that comes with the derailleurs (Shimano “GG Adjustment Gauge” Y3GK89600) and I have added a lip to make…
I print with PETG 0.15mm and 100% infilled
Adapter to fit the Di2 battery into a non compatible seat post. For a seat post with an inner diameter of 21.8mm 3 o-rings (17x2) give a good fit.
Clip to attach Shimano Di2 cables to the brake lines
This is a battery mount/shim to fit a Di2 battery in the seatpost of a Colnago C64. The wall thickness of mine is quite variable and there are seams, so I made two versions to test the fit, and have uploaded both. What also might work is…
Meant as a starting point for custom implementations.
A collection of custom Shimano Di2 satellite shifter button housings
This spool snaps around the Shimano Di2 SM-BCR2 Charger to make it easy to keep stored when not in use When you install it, make sure all the cables have room because the charger is not symmetrical in any orientation and it only works one…
I was in the need of an Navigation device but couldn't mount it properly. So i've created this model to hold my 8" Tablet on the Radiocover of my Mercedes CDI220. Original Radiodisplay i need so that was the only opportunity. I've just…
For this part, I'd recommend using a stiff material. I went with PC Blend, yet regular PLA should also be fine. Supports are needed for one section, but make sure you have overhang threshold set to 30° since that helps to avoid…
A compact and practical tool designed to safely connect and disconnect Shimano Di2 EW-SD300 wires without damaging the connectors. Compatible with 12-speed Shimano Di2 road and gravel groupsets, including: Shimano Ultegra Di2 Shimano…
Folds around the PCB to prevent shorting on tools. Print at 0.2mm layers. Fold it up while it's still warm but don't clip it in yet and let it cool. You'll need to trim down the thru hole pins. Insert a piece of filament as light pipes…
A simple 3D model that allows you to hide the Di2 BT-DN300 battery inside the seatpost. The model is designed for the seatpost compatible with the Hygge Model S frame. All you need is an M6x40mm (or longer) bolt and nut . The torque I use…
I was using a color printout for the last longest time with my xtouch mini and the wonderful SW from https://rsjaffe.github.io/MIDI2LR/ to speed up my lightroom workflow without buying all the expensive gadgets out there. I became unhappy…
This is simple Piano LED Visualizer which lights LEDs based on MIDI signal. More info about hardware is here: https://github.com/stanoba/MIDI2Neopixel Print instructions Rafts: No Resolution: 0.2 Infill: 100% Filament: Prusament PLA
I'm constantly misplacing these 2 tools, so I made a holder with magnets to stick on onto my metal pegboard. I also glued one next to my keyboard in the service area. I have spots for two 3x8mm round magnets. I melted in a chain pin into…
I designed this model to mount the Specialized Flux rear light to the di2 junction box on the seatpost of my Tarmac SL7. I fixed the mount to the bike using one of the srews that holds the junction box, and double sided tape to be secure.…
For holding your VCI with a USB cable still connected
Cannondale CAAD12 Di2 Conversion Kit – Frame Plugs & Cable Clip This 3D-printable TPU set is designed for Cannondale CAAD12 owners upgrading from a mechanical groupset to 12-speed Ultegra R8150 or Dura-Ace R9200 Di2 , ensuring a clean and…
I am riding with Garmin Power Pedals and a Shimano DI2. Both of them may or may not suffer from an empty battery :) With this small box (close it with some electrical tape) you can keep all batteries in their place. This box can hold: 2x…
This part lets you mount a Shimano Di2 SW-R600 remote shifter to a bicycle handlebar with 22.2mm (7/8") diameter. That shifter is usually mounted with two zip ties and some tape, but on my bike that was very flimsy and the shifter…
Replacement for the dust protection Rubber sleeve at the cable plug to Shimano XTR Di2 RD-M9050 Rear Derailleur. Printing instructions 0.4 nozzle 0.15mm Structural 100% infill use brim use TPU-95A (flex) filament
A simple 3D model that allows you to hide the Di2 BT-DN300 battery inside the seatpost. The model is designed for the seatpost compatible with the ELVES Falath EVO+ frame. All you need is an M6x40mm (or longer) bolt and nut . The torque I…
Turns out Shimano Di2 charging cables aren't magnetic, so I made a little clip that the derailleur end of the charging cable drops into to store it up off the floor when not plugged into the bike. This fits the Shimano EW-EC300 charging…
Passt zu diesem Gehäuse: https://www.thingiverse.com/thing:3046535 Print Settings Printer brand: Anycubic Printer: Vyper Rafts: No Supports: No Infill: 20 % Filament brand: any Filament color: any Filament material: PLA
EN - This Di2 junction box cover is designed to integrate cleanly into the Vision Metron 6D handlebar. The goal is simple: a cleaner cockpit look while protecting the junction box. It’s designed to be easy to install and straightforward…
I designed this because I bought a Canyon Stem Computer mount without thinking much and realized it too late. Canyon's return policy states that if the return value is below 40€, the customer pays for the return - which means…
Simple battery tube housing for Shimano BT-DN110 Di2 Battery. Used this with a bottle cage pump mounting. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: 20% infill, 4…
I was using a color printout for the last longest time with my xtouch mini and the wonderful SW from https://rsjaffe.github.io/MIDI2LR/ to speed up my lightroom workflow without buying all the expensive gadgets out there. I became unhappy…
A simple 3D model that allows you to hide the Di2 BT-DN300 battery inside the seatpost. The model is designed for the seatpost compatible with the Hygge Model S frame. All you need is an M6x40mm (or longer) bolt and nut . The torque I use…
For this part, I'd recommend using a stiff material. I went with PC Blend, yet regular PLA should also be fine. Supports are needed for one section, but make sure you have overhang threshold set to 30° since that helps to avoid…
A simple 3D model that allows you to hide the Di2 BT-DN300 battery inside the seatpost. The model is designed for the seatpost compatible with the ELVES Falath EVO+ frame. All you need is an M6x40mm (or longer) bolt and nut . The torque I…
BT-DN300 battery case usually located inside of sheet tube. Otherwise depending on your frame ,there're cases difficulty for battery spaces or electric line treatment,,, So I made outsided battery case attatching drink(or tool)…
BT-DN300 battery case usually located inside of sheet tube. Otherwise depending on your frame ,there're cases difficulty for battery spaces or electric line treatment,,, So I made outsided battery case attatching drink(or tool)…
Do you ride Di2? Have you found it hard to press the D-Fly buttons? I designed this Shimano Di2 Button D-Fly cap from scratch because I was not happy with the other options available online or for download. This version is designed to fit…
Di2 insert for TRP (Tektro) Hylex brake levers, right hand only. This is the placeholder/blank insert that comes with the levers by default. I assume the left hand lever takes a mirror image but haven't actually verified that. Also I…
Insert to replace the plug at the end of the seatstay where the mechanical cable exits to convert to Di2 (SD300 wire)
