1 / 3
Wall Clip for Shimano Di2 Charge Cable (EW-EC300)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to hang a Shimano Di2 charge cable on when not plugged into the rear derailleur. Mounts with a #6 flat head screw.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Turns out Shimano Di2 charging cables aren't magnetic, so I made a little clip that the derailleur end of the charging cable drops into to store it up off the floor when not plugged into the bike. This fits the Shimano EW-EC300 charging cable.
I printed these at 0.3mm layer height in PETG. The hole is sized for a flat head #6 screw. It took about 30 minutes to print two clips.
There are both a .3mf file and a .step file provided if modifications are needed for your use.