Camaro Vent Gauge Pod (5th Gen 2010-2015)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Driver door side air vent gauge pod replacement for 5th generation Chevrolet Camaro
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 303
- Wydruki
- 0
- Wyświetlenia
- 1631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Fits virtually any 52mm (2 1/16") gauge that uses the traditional ‘U' bracket for retention. Gauges with threaded bodies (like Equuis) are not guaranteed to fit or be tightenable. Has a 14x15mm passthrough on the bottom side to allow routing of cables and large connectors without having to drill into any stock ducting.
I have had one installed for over a year now with zero whistling, rattling/vibrating, restricted airflow, or any other issues at any blower speed and temperature setting.
Any filament should be fine other than PLA due possibility of the ambient cabin or HVAC heater temps softening the plastic. Supports are required. F3D and STEP files included for ease of remix.
You will need a strip of open cell foam such as https://www.amazon.com/gp/product/B00005202U to seal up the duct to vent connection.