Lounge Candle Replica for LED Tea Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looks like a lounge candle, but made for LED Tea Lights. NOT FOR OPEN FLAME!!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These were always on the table at lounges, taverns, bars, pubs, etc. It's designed for an LED tea light or LED votive. I was surprised that I couldn't find any replicas of these, so I took a shot at making one. Again, not for open flame (I'm sure you know that already).
I tried printing this in vase mode but didn't like the results. Then I made the wall thick enough to require a slight amount of infill. This is what created the cracked glass appearance that I was looking for. I used translucent red PETG with 3D honeycomb as the infill pattern. You can experiment with different infills. I had to print it relatively slow and hot to prevent it from having a frosted appearance.