Small nozzle for Xiaomi Mi Mini Vacuum Cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small tube like nozzle with a 35° angle tip for the Xiaomi handheld vaccum cleaner
- Ocena
- 4,7 / 5
- Polubienia
- 96
- Pobrania
- 592
- Wydruki
- 10
- Wyświetlenia
- 2587
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The Xiaomi Mi mini vacuum cleaner is a nice little and affordable tool. However, it comes with only one nozzle. To reach small areas and especially to clean my printer enclosure from plastic debris, I have designed this small tube nozzle.
I have created two sizes: tube length 150 mm (print size 200 mm) and tube length 50 mm (print size 100 mm)
Print Instructions
Print in upright position
Use a brim and supports and ensure a good first layer adhesion, as especially the large nozzle is easily knocked over. Use support blockers on the inside of the nozzle, the inside slope prints fine without supports. I have included the PrusaSlicer project files with support blockers already in place.
- Perimeters: 2
- Layer height: 0.2 mm
- Brim + Supports: Yes
- Flags: Detect Bridging Parameters, Extra Perimeters, Detect Thin Walls
- Infill: 15%, Gyroid