Marlin spike / lacing needle combo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Marlin spike / lacing needle combo. This one is a commission.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 628
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Marlin spike / lacing needle combo
I've made similar tools before. This one is the first to include a 3d printed part.
The steel is an 8mm rod, reclaimed from a laser printer toner cassette. The needle is shaped in a drill using an angle grinder. The end is then drilled and tapped to M6.
A small piece of copper pipe is cut and fitted with a ground down M6 hex bolt in one end. Soldered together after fitting.
The copper part is then inserted in the 3D-printed handle with a little bit of super glue.
The handle is finally covered with a turks head using a 2mm polyester-silk line.