Garmin GPS mount - later USB type for Skoda Citigo VW Up and SEAT Mi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This has been superseded by https://www.thingiverse.com/thing:3833402 This is a Garmin GPS mount for the later type…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 2569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This has been superseded by https://www.thingiverse.com/thing:3833402
This is a Garmin GPS mount for the later type fitting in the 2017 Citigo, Up and Mi which have a USB socket under the base. The neck has as a 17.2mm radius ball to match the standard socket on Garmin GPS brackets. There are two designs, a short neck for the 4" GPS, and a longer neck to provide more clearance for 5" and larger screens. EDIT - after more use i suggest using the longer design for all satnav sizes. I have used the clever spring clip design from XenoBlaster so it is all in one piece.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
0.15mm but not critical
Infill:
20% but not critical
Filament:
Various PLA
Notes:
I suggest four perimeters to get better strength and stiffness. It will need supports. The ball may need a bit of sanding depending on how well dialed in you have the support interface but don't remove too much as it needs to be a tight fit.rnrnEDIT I found that the ball wears rather quickly in PLA, the quick fix is a light coat of PU lacquer which seems to provide a harder finish. Later versions I made in Carbon/PLArn
Category: Automotive