Garmin GPS mount - later USB type for Skoda Citigo VW Up and SEAT Mi
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This has been superseded by https://www.thingiverse.com/thing:3833402 This is a Garmin GPS mount for the later type…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 131
- Makes
- 0
- Views
- 2,573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This has been superseded by https://www.thingiverse.com/thing:3833402
This is a Garmin GPS mount for the later type fitting in the 2017 Citigo, Up and Mi which have a USB socket under the base. The neck has as a 17.2mm radius ball to match the standard socket on Garmin GPS brackets. There are two designs, a short neck for the 4" GPS, and a longer neck to provide more clearance for 5" and larger screens. EDIT - after more use i suggest using the longer design for all satnav sizes. I have used the clever spring clip design from XenoBlaster so it is all in one piece.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
0.15mm but not critical
Infill:
20% but not critical
Filament:
Various PLA
Notes:
I suggest four perimeters to get better strength and stiffness. It will need supports. The ball may need a bit of sanding depending on how well dialed in you have the support interface but don't remove too much as it needs to be a tight fit.rnrnEDIT I found that the ball wears rather quickly in PLA, the quick fix is a light coat of PU lacquer which seems to provide a harder finish. Later versions I made in Carbon/PLArn
Category: Automotive