1 / 4
Voron 2.4 Umbilical top rear mount PG7 — zdjęcie 1
1 / 4

Voron 2.4 Umbilical top rear mount PG7

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Umbilical cable top rear mount with PG7 thread

Ocena
0 / 5
Polubienia
16
Pobrania
158
Wydruki
0
Wyświetlenia
1068
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

You can use this part to mount the top rear exit of the umbilical cable in case you dont want to route it through the z-cable-chain (like me). My Voron doesnt have an rear filter, so I placed this right in the middle.

I added some foam on the back side to keep the enclosure sealed.

Printed in black Polymaker ABS with PIF settings.

Tagi