1 / 6
QIDI Q1 pro rear mount 60mm air hose adapter — zdjęcie 1
1 / 6

QIDI Q1 pro rear mount 60mm air hose adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to use a 60mm air hose for rear mount

Ocena
0 / 5
Polubienia
44
Pobrania
224
Wydruki
0
Wyświetlenia
2354
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Adapter to use a 60mm air hose for rear mount. You can use longer wood screws to use the original thread.

I can also provide the parametric fusion file, if you are interested. I would suggest to use PETG or similar.

V1.1

Added a gasket for to be printed in TPU.

 

Future Version:

I will create an additional version for a 2nd 60 mil fan. Also included a plate only version to tinker around.
There ist still work to do. Determing the connection, maybe i will just put it parallel to the existing one. Also, maybe a short tube can be used to connect the inner fan with the outer housing. Printed with HS PLA in zero two layer height.

Tagi