Vise adapter NOW KISS (*^。^*)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter between Open Ball V1 & Multi-axis vice With this adapter you can put whatever @ChrisBorge tool on @sdaendi base.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 2102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TL;DR Adapter allows to attach attachments
from Open Ball V1 (Ball vise system) by @ChrisBorge
to Multi-axis vice with interchangeable attachments by @sdaendi
Fast&Simple version
BOM:
- 1x M4 nut
- 1x M4x20mm hex head screw (you can use longer one)
PRINT:
Everything from Fast&Simple version folder below
ASSEMBLY:
You're smart, you should figure it out.
''Quick release'' version
Sooo… I don't feel like unscrewing and screwing again 4 bolts every time I need to change between one system to another is worth time.
I ditched center locking screw from OG model and just put whole assembly on top.
Maybe less secure but good enough for me \_(ツ)_/
BOM:
- 1x M4 nut
- 1x M4x20mm hex head screw (you can use longer one)
- 4x M3x10mm screw
- 1x 5x20 spring (if hard to source use ball pen spring)
PRINT:
Almost everything from ''Quick release'' version folder below.
If you managed to source “proper” spring (roughly 5x20) print 2x "lever standard", in case you only can get your hands on ball pen spring print 2x “lever 3mm stud”.
ASSEMBLY:
You're smart, you should figure it out. but seriously I gonna fill this part later.