Multi-Radius Curve System for Carrera Evolution & Digital (1/32 & 1/24)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slot track for Carrera 132 and 124 with Radius ranging from R0.25 to R10. Expand your track design!
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 342
- Wydruki
- 1
- Wyświetlenia
- 1886
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A fully modular curve library spanning radii R0.25 through R10—not offered by Carrera off the shelf—so you can expand your track possibilities well beyond the commercial range. Each radius pack contains:
Inner & Outer Borders: Snap-in sidewalls for realistic track-edge detailing (and drifting!)
Conductor Variants:
Original Rails (reuse your Carrera Evolution/Digital metal conductors)
Braided Rails (bring your metal braid)
Angle Modules: Tailored to each radius—smaller curves come in larger segment angles, larger curves in finer increments
Printing Guidelines
Ensure the track top faces towards the print bed
Utilize a textured sheet for better adhesion
Suitable printing materials: PLA or PETG
Use light supports; bridges are designed to be compatible with small supports
For Large curves consider adding “elephant ears” (small circular tabs) at the ends to prevent lifting and improve first-layer adhesion and heating the bed more than usual.