Multi-Radius Curve System for Carrera Evolution & Digital (1/32 & 1/24)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slot track for Carrera 132 and 124 with Radius ranging from R0.25 to R10. Expand your track design!
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 342
- Makes
- 1
- Views
- 1,886
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A fully modular curve library spanning radii R0.25 through R10—not offered by Carrera off the shelf—so you can expand your track possibilities well beyond the commercial range. Each radius pack contains:
Inner & Outer Borders: Snap-in sidewalls for realistic track-edge detailing (and drifting!)
Conductor Variants:
Original Rails (reuse your Carrera Evolution/Digital metal conductors)
Braided Rails (bring your metal braid)
Angle Modules: Tailored to each radius—smaller curves come in larger segment angles, larger curves in finer increments
Printing Guidelines
Ensure the track top faces towards the print bed
Utilize a textured sheet for better adhesion
Suitable printing materials: PLA or PETG
Use light supports; bridges are designed to be compatible with small supports
For Large curves consider adding “elephant ears” (small circular tabs) at the ends to prevent lifting and improve first-layer adhesion and heating the bed more than usual.