Shock and Popfilter Mount for the LSM - Little Square Mic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The LSM is an awesome microphone from Studio Projects, but unfortunately doesn't come with a shock mount.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
The backplate has a 1/4" thread, I used a hot-shoe adapter to get a sturdy adaptation for my stand.
The backplate was printed with PLA, the shockmounts and the pop filter holder was printed with flexible TPC (tested with Shore 45D/95A).
The LSM has 2 M5 threads, the shock absorbers and the pop filter are meant to use M4 screws on the backplate.
The backplate and the popfilter can be printed pretty fast without supports (I used .3mm layer height). Even after a few tries I couldn't get the shock absorbers to work without a more complicated design and you have to print supports for them.