Replacement Lens Dial for fujifilm instax mini evo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your lens dial broke off, or is damaged, or you dont like it, here is this custom one, in any colour you want :D
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 866
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
The shiny gray dial on my instax mini evo didnt look very nice, so I designed this one and made it in black, now my camera looks 5% cooler and works 0.05% better.
It is a replacement for the original dial, so, first remove the gray dial ( it is held in place with 4 clips) and just snap this replacement in its place.
If the tolerances are not tight or you want to edit the design, .step file is attached.
I sudgest printing with 0.2 layer height, and do take care to flip the model in prusa slicer so the wider part is on the buildplate. No supports needed.
Keep in mind that the little tabs on the replacement dial if printed in PLA will start to degrade if you take if often, so you mignt need to print another. :)