IKEA SKADIS (SKÅDIS) Shelf Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lid for the IKEA SKÅDIS Shelf. It creates a platform and a "hidden" compartment for the shelf.
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 182
- Wydruki
- 0
- Wyświetlenia
- 1768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
About
I made this lid to put on top of the IKEA SKÅDIS Shelf as I did not like the metal walls of the shelf. The lid creates a platform and a “hidden” compartment for smaller items.
Additional Comments
The lid was split into 2 due to buildplate size limitations for my 3D printer (220mm x 220mm). I can create a full lid if requested.
The method of joining the two parts together were for experimentation. Of course there are better ways of joining the two parts; however, I was content with how it turned out.
One way of improvement is to make the double C connectors shorter to allow for more clearance in the “hidden” compartment.
The part joining method was inspired by Joseph Willis (@madebyjwillis on Instagram).