Compact Mixbox Style Controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a Mix-box style controller so I modeled one in fusion 360, hope you enjoy!
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 208
- Wydruki
- 0
- Wyświetlenia
- 1664
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Mix-box style controller I designed in fusion 360, the outer "shell.stl" and “key frame.stl” are purely for aesthetics and do not need to be printed although you would need to accommodate with a shorter screw for the shell. This design uses a Raspberry Pi Pico as well as GP2040 Firmware. The mechanical switch mounts as well as key-caps are not my design and are linked and credited below. Thank you for checking it out, this was a blast to make!
Parts list:
1 x Raspberry Pi Pico
1 x USB-C Breakout Board
4 x Threaded Inserts
4 x M5 Screws
12 x Gateron Mechanical Switches
5 x Momentary Tactile Push Button
3D Printed Key-caps and Housing:
All credits to Rana Labs
8 x Housing (bottom and top)
8 x Circular Key-caps