1 / 3
Ski Bindings Restrainer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
When using a Sportstube ski case the binding brakes must be restrained to allow the skis to to slide into the case. The original rubber bands eventually split as they get cut by the sharp edges of the skis.
This design uses TPU A95 which is less stretchy than the original rubber bands so holds the brakes more securely. It is prevented from slipping by by the small loop which goes over the rear binding.
I printed the Grey one in Overture A95 TPU and the Orange one in Overture High Speed TPU