1 / 3
Ski Bindings Restrainer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A restrainer for the brakes on a ski binding so the ski can be installed in a Sportstube case.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 1
- Views
- 489
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Noncommercial
When using a Sportstube ski case the binding brakes must be restrained to allow the skis to to slide into the case. The original rubber bands eventually split as they get cut by the sharp edges of the skis.
This design uses TPU A95 which is less stretchy than the original rubber bands so holds the brakes more securely. It is prevented from slipping by by the small loop which goes over the rear binding.
I printed the Grey one in Overture A95 TPU and the Orange one in Overture High Speed TPU