Hydroponic Tower Spacer with M3 Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hydroponic Tower Spacer with M3 Supports for supporting tower, or adding lights and other things.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So this was a 40mm spacer print for the hydroponics tower model that was done by Thingiverse user boundarycondition, and is licensed under cc-nc-sa.
I wanted to print a tower with the larger spacers and modules without the M3's on the modules. But then I need a few for mounting lights. So this lets you throw in the small 40mm spacer anywhere on your tower and have the M3 mounts; or add more spacers to have the M3 mounts.
Printed in PETG
Infill 10-20%
Nozzle .20-.30
Print with standard supports covering a 45 degree angle.