Wall mount adapter for the Bluebrixx Star Trek TNG Enterprise set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount to vertically mount the large brick build TNG Enterprise by BlueBrixx vertically
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 1146
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall mount to vertically mount the large brick build NCC-1701-D Enterprise by BlueBrixx vertically.
The part is split to allow layer orientation in a way, the main forces are not pulling the layers apart, at least for the two parts carrying the sourcer section
Downside: support is needed.
To connect the wall mount to the model (sourcer section), use four axle 8L or longer.
The parts have inserts to add three technic bushings on each side, to hold the axles.
The lower part requires a 5L axle and one bushing.