1 / 4
Wall mount adapter for the Bluebrixx Star Trek TNG Enterprise  set — image 1
1 / 4

Wall mount adapter for the Bluebrixx Star Trek TNG Enterprise set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A wall mount to vertically mount the large brick build TNG Enterprise by BlueBrixx vertically

Rating
5 / 5
Likes
22
Downloads
66
Makes
1
Views
1,146
Reviews
1

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

A wall mount to vertically mount the large brick build NCC-1701-D Enterprise by BlueBrixx vertically.

The part is split to allow layer orientation in a way, the main forces are not pulling the layers apart, at least for the two parts carrying the sourcer section
Downside: support is needed.

To connect the wall mount to the model (sourcer section), use four axle 8L or longer.
The parts have inserts to add three technic bushings on each side, to hold the axles.
The lower part requires a 5L axle and one bushing.

Tags