Adjustable, handy Router Platform for Bosch GRO 12V-35
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Router platform for the Bosch GRO 12V-35 Dremel/multifunction rotary tool to be used for various wood working tasks
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 946
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this router platform for the Bosch GRO 12V-35 Dremel/multifunction rotary tool so that I can do basic router tasks with cove, roundover, corner, flush trim, cutting, or profile router bits etc. Each edge of the router platform has a different measure as a stop dimension: 100, 75, 50 and 30mm from the middle of the router axis.
I designed the 3d model so that two 140mm M5 hex screws and one 70mm M5 hew screw work just fine. I use wing nuts for easy adjustment, however, the two wing nuts for the 140mm screws had the be trimmed a bit so that they can move freely.
For the coupling mechanism, I used the V sleeve from Udo01 from Thingiverse. Since this small part had to be strong, I let this print with a printing service rather than printing it myself, but printing your own should do so as well.