Tilt and Swivel Adjustable Work Platform
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball lock adjustable platform to attach clamps or other items. Uses Honeycomb Wall grid for attachment points.
- Ocena
- 5 / 5
- Polubienia
- 147
- Pobrania
- 345
- Wydruki
- 1
- Wyświetlenia
- 2116
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ball lock adjustable work platform that is 100% 3d printed without supports.
Almost 200mm x 200mm work platform, that uses the Honeycomb Wall standard to attach various holders or tools.
Only 4 pieces for the main platform and holder.
I've remixed a Honeycomb Wall Clamp frame to use, but the clamp itself without the remix would also work well. The other files to download at the original designers upload here: https://www.printables.com/model/561566-honeycomb-wall-clamp
Other uses:
- Solder helping hands with fume extractor.
- Circuit board holder
- Clamp models for painting
- Hold wood for wood burning or Dremel carving
I used a couple drops of oil to screw the platform to the ball stem.
I suggest using the Reduced Friction insert for the Honeycomb Wall attachment. Makes it a lot easier to insert and remove. https://www.printables.com/model/477401-hsw-insert-empty-with-reduced-friction
More remixed holders and stuff to be added.