Tilt and Swivel Adjustable Work Platform
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ball lock adjustable platform to attach clamps or other items. Uses Honeycomb Wall grid for attachment points.
- Rating
- 5 / 5
- Likes
- 147
- Downloads
- 345
- Makes
- 1
- Views
- 2,116
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ball lock adjustable work platform that is 100% 3d printed without supports.
Almost 200mm x 200mm work platform, that uses the Honeycomb Wall standard to attach various holders or tools.
Only 4 pieces for the main platform and holder.
I've remixed a Honeycomb Wall Clamp frame to use, but the clamp itself without the remix would also work well. The other files to download at the original designers upload here: https://www.printables.com/model/561566-honeycomb-wall-clamp
Other uses:
- Solder helping hands with fume extractor.
- Circuit board holder
- Clamp models for painting
- Hold wood for wood burning or Dremel carving
I used a couple drops of oil to screw the platform to the ball stem.
I suggest using the Reduced Friction insert for the Honeycomb Wall attachment. Makes it a lot easier to insert and remove. https://www.printables.com/model/477401-hsw-insert-empty-with-reduced-friction
More remixed holders and stuff to be added.