Spliff Safe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Nice little joint keeper that can also keep you entertained, stores one joint. The safety cap can easily be removed or flicked off, there is also a spot at the bottom to store the cap while using the lighter.
Fits classic BIC lighters and the doob tube is 12mm ⌀ x 75mm depth. Remove stickers from lighter for best fit.
PRINT SETTINGS:
0.4mm nozzle
IMPORTANT: 0.2mm layer height for initial and all other layers. This is needed for the floating cantilever inside the model to separate.
2 walls minimum
Classic wall generation for main body (Make sure to adjust gap fill), Arachne for caps.
10% infill of your choice
Paint seam on long edge or try scarf joints.
No supports needed
Videos:
Alternative method to snap the safety cap off.
