Artis3D feeder Type MK Version 2 (for Creality K1/K1MAX)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated version of a feeder for Creality K1/K1MAX which is based on BMG extruder gear set.
- Ocena
- 4,5 / 5
- Polubienia
- 93
- Pobrania
- 391
- Wydruki
- 1
- Wyświetlenia
- 3331
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an updated version of the feeder for Creality K1/K1MAX which is based on BMG extruder gear set.
Changings in Ver.2:
- more convenient unclencher
- both 10t/12t motors supporting
- closed body (more simple)
- fixed some errors
There are 4 variants:
* For MOONS 12-teeth / standard NEMA14 10-teeth
* For simple fitting / ECAS04
Pay attention that for MK and MKe it is necessary to cut shaft to 2.5mm from gear side (it lets to use 10t NEMA14).
Recommended filament: PETG, PA (fiber), ABS/PC, PBT
Recommended printing parameters: 0.4mm nozzle diameter, 0.1mm layer thickness, 40mm/s printing speed, printing without supports excluding some items (see the screenshot)
Links to extruder parts:
BMG gears set:
https://bit.ly/47oLQib
https://bit.ly/3uabEA0
https://bit.ly/49qzdVt
BMG Extruder (clone):
https://bit.ly/3tXF8ky