1 / 2
Trash can (rubbish bin) with self closing lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got inspire by some designs I had seen and I decided to try and make my own larger bin.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 972
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (27)Powiązane
I had seen a few self closing bin designs and decided to make my owe. I wanted to make the biggest I could fit on my build plate without splitting it. The lid and can were printed separately to maximise the size. The bottom can was printed in spiral at 1.5mm think. The lid and rim was printed as normal. On my first print the lid and rim were fused together so I have also put the lid and rim as two separate files as well.