IKEA Skådis Snapping Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA Skådis pegboard hooks that won't accidentally come loose
- Ocena
- 4,833 / 5
- Polubienia
- 57
- Pobrania
- 246
- Wydruki
- 7
- Wyświetlenia
- 1409
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The original IKEA Skådis hooks can be a pain, especially if you put something on them that grips slightly, like a pair of pliers. Once you lift the pliers, the hook comes loose since you'll never lift exactly vertically.
That's why I made these hooks that snap into place on the IKEA Skådis pegboard.
In addition to the satisfying “click” of it snapping into place, you also get a button to push when you want to dismount it. Yay!
No supports needed. I had great success with thin layer heights like 0.10mm but 0.20mm should be fine.
Use the base STL to create your own hooks. Note that there's a slight angle to compensate for the deformation, so make sure you align them properly.