1 / 3
ENDER 3 S1 PLUS Light Spacer to fit Ender 3 MAX/CR10 Light — zdjęcie 1
1 / 3

ENDER 3 S1 PLUS Light Spacer to fit Ender 3 MAX/CR10 Light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Those are Two little spacers to fit the original Creality Light for Bigger printers on the Ender 3 S1 PLUS

Ocena
5 / 5
Polubienia
15
Pobrania
37
Wydruki
1
Wyświetlenia
717
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

There is no specific lightbar that fits the Ender 3 S1 PLUS. Those are Two little spacers to fit the original Creality Light for Bigger printers on the Ender 3 S1 PLUS. Just Print one of each and you are good to go to screw the light on your printer. The light need to be conected dirctly to the 24V Power Supply (or you can convert the 2 cables into the right JST connector to plug them into the light connector on the printer)

Here is an link to the lightbar:

https://www.amazon.com/Creality-Ender-Light-Upgrade-Printer/dp/B0C3HH3QNW/ref=sr_1_3?crid=24JQBEM1WO1F6&dib=eyJ2IjoiMSJ9._EuIDAY9_qNsEXqHQuOqk8Q_OVPbZRIa85AS3VWe4yd4nAH4lqfRW4eMPpCRK0pBQ0hpTSSiJufZnHrAj7A_OATul0WHSsoyC04ix7ylPGL5nokKf4cPDCpciH07jzpBK8N9TLtNBhuM3MMc_-aKbxOkxXPTCKdbw3N34p3beORnckS1DN4ObXFy3wTdBtSE189h_sGC-J7LGM03fJlutmyx7DUvnSxg52f-IXF-ekk.NNn6_XZ-0KQD6ZmjPc-D6FVdhDvg6qacENnyDXi0ue8&dib_tag=se&keywords=ender+3+max+light&qid=1712161861&sprefix=ender+3+MAx+li%2Caps%2C232&sr=8-3

 

Printed in PLA

0.2mm layer height

Tagi