Silicone brush mould
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mould for a 42 x 12 x 15mm silicone brush
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Standard Digital File License
I saw on youtube that using a brass brush will damage the nozzle for my Voron 3D printer. So I designed and made a mould to make a silicone brush to clean the nozzle and surprisingly worked extremely well (a lot better than I expected).
The size and shaope of the silicone brush was designed to fit the brush holder and purge bucket in my other design.
https://www.printables.com/model/793347-voron-trident-nozzle-cleaner-and-purge-bucket
This is will require 4 x M3x 20mm screws with 4 M3 nut bolt on the other side to hold and tighten it. I recommend using 0.4mm with at least 20% infill, material is not important as I used PLA and it worked fine.